Kolme Mirror Long

A dignified arched standing mirror

This large standing mirror is made of metal with a matte finish. The graceful curves give it a strong presence, while the clean appearance unique to metal gives it a light impression. Its simple and calm atmosphere makes it suitable for both antique and modern furniture.

It is a large mirror with a width of 51 cm and a height of 165 cm. It comes with a stand so you can move it anywhere.

The frame is only 8mm thick, giving it a wide mirror surface.
It gives depth and spaciousness to the space and reflects a lot of light, making the room very bright and open.
It is highly recommended not only as a full-length mirror, but also as a body check for those doing training or fitness.

The legs can be folded up and it can also be hung on a wall.
Not only does it function as a mirror, but it also looks great as interior décor.

The case is made of thin, sturdy aluminum, and the surface is finished with a matte finish, giving it a clean, calm look.
Although simple, the arch at the top acts as an accent, making it beautiful enough to be used as interior decoration.

About the product

There may be traces of caulking or paint on the mirror surface or back. If you are concerned about this, please use a parts cleaner.

The joint surface of the frame may be exposed.

There may be small scratches or scuffs due to the production process or transportation.

Installation precautions

• For safety reasons, when opening the stand for use, be sure to press the "stay (opening prevention bracket)" (hereafter referred to as the bracket) all the way in until it clicks into place.
• When closing the stand, please be careful not to get your fingers pinched by the metal fittings. It is recommended to use a thick cloth when opening and closing the metal fittings.
• When folding the stand, the metal fittings may be pushed forward, so be sure to push them back in.
• When hanging the product on a wall, be sure to check that the metal fittings are not protruding before installing it to avoid damaging the wall.
• If it is difficult to push the metal fittings back in, or if the bottom of the stand floats slightly when you push the metal fittings in, use both hands to pull both ends of the stand inward while pushing the metal fittings in.

• When hanging on a wall, place the screws suitable for a vertical and stable wall horizontally so that they protrude, and then hook them onto the metal fittings on the back of the product.
• Screws are not included. We recommend consulting a hardware store to purchase screws suitable for your wall.
• This is a heavy product. For safety reasons, installation should be done by at least two adults and should only be used on walls with a base.

---

Product Specifications

size	Standing (with stand): Approx. W510 H1600 D400mm Wall-mounted (without stand): Approx. W510 x H1650 x D27
weight	12kg
Material	Aluminum, MDF board
Notes	When hanging on the wall, hook the screw heads onto the two metal fittings on the back. This is a heavy item, so please make sure to check the load-bearing capacity of the wall with reinforced base before installing it at your own risk. For safety reasons, installation should be done by at least two adults. Screws, hooks, etc. are not included. The type of screws and hooks that are suitable will vary depending on the wall's base. Be sure to use the correct one for the type of wall you are mounting it on. When driving screws into plasterboard, use board anchors for plasterboard, available at hardware stores. As a precaution against earthquakes, we recommend securing the unit to the wall using commercially available anti-tip devices.