An arched standing mirror that blends in with antiques
While the three-dimensional frame gives it a sense of presence, the paulownia wood texture is just the right amount of restraint, giving it a rustic impression. It has a calm appearance and blends well with antique furniture.
A full-length mirror with a width of 50 cm and a height of 152 cm. Since it is a stand type, it can be moved anywhere.
Although it is a large size, the frame is tailored thin and has a wide mirror surface. It adds depth and spaciousness to the space, and reflects a lot of light, making the room brighter and more open.
If you remove the legs, you can stand it up or hang it on the wall.
Not only does it serve as a mirror, but it is also wonderful to incorporate into your interior.
The material used is light and has beautiful grain.
The design of the convex and convex frame has been carved smoothly by craftsmen. The gentle texture that is not too flashy is unique to paulownia wood, which has a gentle grain.
Paulownia wood, which has been popular in Japan for centuries for chests of drawers, has large cavities that make it highly moisture resistant (humidity control), and it also has an insect repellent effect as it contains a lot of tannin, which insects dislike. This material is also suitable for mirrors used in closets and bathrooms. Also, since it is not dense, it has a light and rustic impression. It has a calm appearance that blends seamlessly into your interior.
Paulownia wood mirror series list
[Removing and attaching the legs]
The legs can be removed by removing the joint on the leg side and the Phillips screw on the chain with a screwdriver.
⚠️ If you use it for a long time with the legs fully open, the metal fittings will be subject to stress and the chain may come off. Please install it at an angle that leaves the chain slightly slack as this may cause damage.
*The chain on the mirror side will be hanging down on the back.
When hanging on the wall, hook the screw heads to the two metal fittings on the back. Since this is a heavy product, please be sure to check the load capacity on a reinforced wall surface before installing it at your own risk. For safety, we recommend that two or more adults work together.
Wood Arch Mirror Long
| size |
W508 D20 H1524mm
Depth when standing: Approx. 250-600mm
Weight: about 9.8kg |
| Material |
Paulownia wood (lacquer finish) |
| Notes |
- The color may vary slightly depending on the production period.
- When hanging on the wall, hook the screw heads to the two metal fittings on the back. Since this is a heavy product, please be sure to check the load capacity on a reinforced wall surface before installing it at your own risk.
-
If you use it for a long time with the legs fully open, the metal fittings will be subject to stress and the chain may come off. Please install it at an angle that leaves the chain slightly slack as this may cause damage.
- For safety, we recommend that two or more adults work together.
- As a measure against earthquakes, etc., we recommend that you fix the installation surface to the wall using a commercially available fall prevention device.
- Screws and hooks are not included. The types of screws and hooks that are suitable for the wall differ depending on the base of the wall. Please use the one that is suitable for the type of wall you want to install.
- When attaching screws to plasterboard, please use board anchors for plasterboard sold at home centers.
|
| remarks |
The legs can be removed by removing the joint on the leg side and the Phillips screw on the chain with a screwdriver. At this time, the chain on the mirror side will hang down on the back. |
