Skip to content
Free shipping for orders over 22,000 yen (tax included)
Free shipping for orders over 22,000 yen (tax included)
【Bent】 Paper Holder Double -2way-

【Bent】 Paper Holder Double -2way-

¥18,700 - ¥18,700
¥18,700
¥18,700 - ¥18,700
¥18,700
配送：Eaves delivery
送料・配送について
お届けについて

発送・納期について
お支払い確定後、通常10日以内に発送いたします。
※繁忙期や交通事情により、お届けまでお時間をいただく場合があります。

配送方法：軒先引き渡し
・軒先で商品の受け渡しを行う通常の宅配便です。
・商品は梱包状態でのお渡しです。組み立てや設置が必要な商品は、お客様ご自身で行っていただきます。

ご注文前に必ずお読みください

注意事項

  • 自然素材を使用している商品は、1点1点大きさや形、色味や濃淡、木目や節などの表情が異なります。
  • 製造上や配送の過程で、わずかな傷や色むらが生じる場合がありますが、商品の特性としてご理解ください。
  • 商品ごとの詳しいお取り扱いは、商品詳細やご利用ガイドをご確認ください。

商品画像について


商品画像はできる限り実物に近づけて撮影しておりますが、撮影環境や光の強さ、角度によって色味や質感が異なって見える場合があります。また、お使いのモニターやスマートフォンの環境により、実際の色味と差が生じることがございます。

お支払い・決済について

クレジットカード／PayPay／ApplePay／GooglePay／あと払いPaidy（分割払いも可）／銀行振込など。詳細はご利用ガイドをご確認ください。

返品・交換・キャンセルについて

ご注文後7日間は、商品発送前であれば注文キャンセルが可能です。商品到着後、7日以内であれば商品不良や配送破損等の場合に限り、返品交換をお受けいたします。初期不良の場合は別途お問い合わせください。詳しくはご利用ガイドをご確認ください。

A brass paper holder with an attractive arm featuring beautiful bends

The PARTS & SUPPLY original product series "Bent," named after the English word for "bend," focuses on beautiful "bends" created by Japanese craftsmanship. This lineup highlights the art of bending made in Japan.

A simple modern paper holder combining an arm with beautiful bends and a thick base plate. The pressing part uses a knurled material to create an elegant atmosphere in the space.

In addition to single installation, it is a 2-way specification that can also be ceiling-mounted using shelves and brackets. By combining separately sold shelves and shelf supports, you can customize it into a paper holder with a shelf.

* When used for ceiling mounting, you will need to manually change the direction of the pressing part, so please check the video below for details.

Product specifications

Size Approx. W310 D85 H60mm
Base plate thickness 3mm
Material Brass material
Accessories None (screws are not included)
Recommended Screws Brass round head screw plus wood screw 8×4.1×25mm

Precautions

  • As this product is handmade, there may be slight individual differences in dimensions and bends.
  • Since solid brass material is used, aging changes may occur before delivery.
  • The arm of the paper holder is fixed by bolt fastening and welding.
  • There may be discoloration from welding on the product. This is considered within the range of acceptable quality, so please understand in advance.
  • This product has a rough finish applied during manufacturing, but there may be small scratches, patterns, or discoloration unique to the material. These are considered within the range of acceptable quality, so please understand in advance.
  • This product uses brass material. Due to the characteristic aging of the material, discoloration, verdigris, or blackening may occur. If these are a concern, maintenance can be done with commercially available brass polish or products like Pikal.
  • This product may have "bend marks" when bent. Please note that this is considered within the acceptable range of quality.
  • The included screws are designed with aesthetics in mind. Please prepare screws suitable for the location and material when installing.
  • Please prepare screws suitable for the location and material when installing.
  • About Brass Products

Bent Series

PARTS & SUPPLY Original Products
The Bent series, named after the English word "bend," is a lineup focused on the beautiful "bending" craftsmanship of local Osaka town factory artisans at P&S.

View Bent Series

page title

対応OSバージョンはダウンロードページでご確認ください