Loimi Pendant Light (Brass)

《Small LED bulb E17》
Size: About φ35 x H67mm
Mouthpiece diameter: E17
Power consumption: 2W
Weight: about 12g
Brightness: 230 lumens (*equivalent to 25W incandescent and fluorescent lamps)
Rated life: 20,000 hours Color temperature: 2700K

《Small LED bulb E17 Milky white》
Size: About φ35 x H67mm
Mouthpiece diameter: E17
Weight: about 12g
Power consumption: 4.5W
Total luminous flux: 440 lumens (equivalent to 40W incandescent bulb conversion)
Color temperature: 2700K (bulb color)
Rated voltage: AC100V
Rated current: 0.055A
Rated life: Approx. 20,000 hours Outdoor use: Not allowed Sealed equipment: Yes
Light control equipment: Impossible Human sensor: Impossible

• Since each product is made by hand, there may be some unevenness on the surface, and there may be slight individual differences in shape and texture.
• This product is for LED bulbs only. Please note that incandescent bulbs cannot be used.
• The brass material is not coated to prevent oxidation, so it is easy to get fingerprints. The material will change to a dull look over time, so please enjoy it with your life.

• It is not compatible with insulation construction equipment.
• The rated life is a design value, not a guaranteed value.
• Depending on the type of sealing device, it may not be usable or its life may be shortened due to factors such as mismatched dimensions or heat build-up.
• Cannot be combined with lighting equipment that uses firefly switches. (Please note that if you use it in combination with a lighting device that uses a firefly switch, the LED light bulb will remain lit even if the switch is turned off.)

• Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
• Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
• In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
• Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
• If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. ( *Beeswax cannot be used on clear-coated products. Wipe with a dry cloth. )

*Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.

• If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
• If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
• If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
• If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
• Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.